Question: How Do You Replace The Belts on a
Hoover WindTunnel?


Answer: The repair can be a little challenging but the video below will make this repair much easier. All you need is a Phillips Head Screwdriver. Please note, for this machine belt changes are needed every six months. Please ensure to take the flat belt (bigger belt) part # 38528035 off before the power drive belt which is part # 38528034. 

Hoover WindTunnel V-Belt Part 38528034
http://www.govacuum.com/belts/power-drive-v-belt-hoover-part-38528034-one-per-pack.html

Hoover WindTunnel Self-Proplled Upright Flat Belt Part 38528035
http://www.govacuum.com/belts/hoover-flat-belt-part-38528035-for-hoover-windtunnel-17385.html


Please Click Here to watch how to repair the Hoover WindTunnel belts and brush roll:

Please consult with our website to select the proper brush roll that fits your model of WindTunnel, by Clicking Here

How To Replace The Belts on a Hoover WindTunnel